If you installed the powerful A2N Kernel to your Galaxy Ace 2 then this Kernel Control App is a "must-have-App" to enjoy your Phone and Kernel properly.

This App is only for the following Devices and only in combination with A2N Kernel.

### Supported Devices ###

--> GT-I8160
--> GT-I8160P
--> GT-I8160L

### App Features ###

# Power
--> Allows you to adjust AC / USB 2.0 Charging Current(max) (separately) from 100 - 1000 mA in 100 mA Steps (Fail-safe)
--> Charging Current - Check if the power source can handle the selected Current, if it's unstable the Kernel will reduce the Current till it is safe.
--> 80% Charge - Stops and holds charging at 80%, useful if charging over night to reduce the battery stress.
--> BLN EOC - When Battery is full turn on the Soft-Keys LEDs.
--> USB Power - Enables output Voltage to the USB Port, useful if u need to power up some usb gadgets (no real OTG Support)
--> Show power Menu - using an emulated power-button press, useful if the power-button is broken (You can boot the Phone with a cheap USB-JIG Adapter)

# Audio #
--> Low Level Gain Control - Headphones, Earpiece and Microphone
--> LPA - Low-Power-Audio, reduces Audio Voltage on Suspend for Powersaving (up to -100 mV)
--> Volume Control - Emulated buttons press (useful if the hardware buttons are broken)

# Screen #
--> Sweep2Wake - Wake up the phone with a Swipe
--> Suspend - Emulated (useful if the Power button is broken)

# CPU #
--> Adjust CPU Max Frequency - Overclock Control (400 - 1300 MHz)**1
--> Undervolting (up to -200 mV)

# GPU #
--> Adjust GPU Max Frequency - Overclock Control (450 - 800 MHz)**2
--> Undervolting (up to -200 mV)

# Performance Profile #
--> Powersave
--> Balanced
--> Performance

# Misc #
--> KSM - Kernel same page merging, to use RAM more efficient (only 1% CPU load on Idle)
--> Check shared RAM - Shows the amount of saved RAM in MB
--> FSB/DDR Overclock (overclocks FSB/DDR Frequency from 200/800 MHz to 250/1000 MHz, improves overall performance)
--> Torch Brightness - allows you to adjust the Brightness of the rear LED (Camera Flash for Torch)
--> Use as Notifications LED - uses the Soft-Key LEDs
--> ON/OFF Delay - Ability to adjust how the LEDs should blink
--> Network File Systems - Enables Support for CIFS and NFS
--> Use calibration data - Accelerometer calibration
--> Disable Logger - Disables Android Logger, for powersaving

# Debug-Menu #
--> Disable Restore on Reboot - Disable restoring of settings on reboot, useful if you are not sure whether the settings are stable.
Otherwise all settings will survive a reboot.

**1 = Stock CPU max Freq is 800 MHz and the maximum adjustable Freq of 1300 MHz is very rare to work stable, since it depends on the quality of the CPU.
However the minimum stable overclocking Freq should be 1150 MHz, but if your Phone has good Quality chips then it will work stable at 1200 MHz or even 1250 MHz.
So the very high Frequencies are not meant to work 100% stable, but they are there so that you can see what is the maximum stable Freq possible for your Phone.

**2 = Same like CPU, the Stock GPU max Freq is 400 MHz. The max adjustable Freq of 800 MHz is unlikely to work stable, but 650 - 700 MHz should work stable for every Phone.

### END OF App Features ###

For more details, please check the Screenshots.

### DISCLAIMER ###
--> I am not responsible for any pain you may feel as result of using my App. You do it all at your own Risk!

World-gear-symbol designed by Freepik from www.flaticon.com - edited by ace2nutzer

// Option A //

To download A2N Kernel Control Ace 2 mod from HappyMod.com.
You need enable the option "Unknown Sources".
1. Click on the above link to download A2N Kernel Control Ace 2 mod APK.
2. Save the file in your device Downloads folder.
3. Now tap on Install and wait for the installation to finish.
4. Once it is done, open the game and start playing it right away.

// Option B //

To download A2N Kernel Control Ace 2 from HappyMod APP, you can follow this:
1. Open your browser and download the HappyMod APK file from HappyMod.com - the only official website of HappyMod.
2. Open Android Settings and go into Privacy or Security.
3. Tap the option to Allow Unknown Sources and enable it.
4. Go to your Android downloads and tap the APK file.
5. Follow the directions on the screen to install it.
6. Search A2N Kernel Control Ace 2 in HappyMod App.